Joined in 2023 
82 
63 About this deal
hours charging time will give you 12 hours of battery life for the transmitter, and 10 hours for the receiver. The auto-pairing feature on the WL-20 and WL-50 is really handy for plug and play, but for some users looking to utilise multiple units in their band, it can be easier to know specifically which channel each player is on. The easiest introduction to the world of wireless systems, WL-20 consists of a bug style transmitter and corresponding receiver, with a nominal operating range of 15m. At street gigs and other mobile performance situations, running your pedals on battery power is often the best choice. The WL-50 receiver can run for up to sevenhours on two AA batteries, allowing you to take your wireless setup with you! While running on battery power, the receiver is unable to charge the transmitter. But don’t worry—you can still charge it using a common USB adaptor (5 V/500 mA or higher), the same type used with most smartphones and tablets. Specifications (RECEIVER) Wireless Format BOSS proprietary digital audio format Wireless carrier frequency 2.4 GHz Compatible Channels 14
With cable tone in the OFF position, the WL-50 is suitable for use low impedance sources such as guitars with active preamps. This is the same as the WL-20L. For information on the CABLE TONE feature, refer to this (the "WL-50: What kind of benefits does CABLE TONE provide?" link). The WL-50 fits snugly into your pedalboardwhere it can charge and provide up to 12 hours of continuous battery life. Setup only takes 10 seconds after plugging in the transmitter, so plug in and play in a pinch.You won't expect any signal drop-outs as the Boss wireless system works in a 2.4 GHz frequency for great audio. Ultra-low latency also prevents a lag between playing and the amp producing sound. Creative design With cable tone on the “short” setting, the cable tone simulation reproduces the tone of using a 10 foot cable. This is the same as the WL-20.You can use any of the three (the WL-20, WL-20L, or WL-50), but we recommend the WL-50, which lets you switch the CABLE TONE feature. Make your live shows dynamic with the intuitive Boss WL-50 wireless system. No longer will youget tangledin a mess of cables or fiddle with frequencies while trying to connecttransmitters. Key Features
It can be powered via 9V adaptor or 2 AA batteries for up to 10 hours. If you’re using an adaptor, the WL-50 can be used as a power distribution hub to power other pedals via daisy chain. To charge the transmitter, the receiver must be powered via a BOSS PSA-S adaptor. It’s also possible to directly charge the transmitter with a standard USB adaptor (5 V/500 mA or higher). oz Specifications (TRANSMITTER (WL-T)) Nominal Input Level -10 dBu (1 M ohm) Indicator BATTERY Connectors Input plug: 1/4-inch TRS phone type This can be an issue with low-end digital wireless units, which typically only have 3-4 channels to choose from. If these channels happen to be very heavily in use, then you may experience severe dropouts and interference when you least expect it.Charging simultaneously with the transmitter: Approximately 4 hours Expected battery life under continuous use Approximately 7hours With the WL-50, it’s never been easier to bring wireless freedom to your pedalboard. Driven by new BOSS technology, the WL-50 delivers premium sound and a plug-and-play experience that eliminates all the hassles normally associated with wireless systems. allow for an elbow joint between the receiver's 1/4 inch input and the body so it can fit more compactly against my fiddle. That'd be freaking awesome, man. Boss havedesigned a clever cable tone selection with three settings, to recreate the warm, rounded sound of cableconnection. Choose short, long or bypass to select the length of cable you would like to simulate. Included in the Box The WL-50 is designed for players who want to integrate their wireless system into their pedalboard. You may have noticed that the receiver shares a similar size and form factor with the iconic BOSS compact pedal!
Cable tone simulation reproduces the natural capacitive effect of a 10-foot/3-meter guitar cable (WL-20 model only)when the receiver is off you can't fully insert the transmitter into the receiver for storage without draining the transmitter's battery. I solve this by not inserting the transmitter all the way into the receiver so no big deal, but still… May vary due to local conditions) Latency 2.3 ms Dynamic Range 110 dB or greater Frequency Response 20 Hz--20 kHz Nominal Input Level -10 dBu Input Impedance 1 M ohm Nominal Output Level -10 dBu Output Impedance 1 k ohm Recommended Load Impedance 10 k ohms or greater Controls CABLE TONE switch (OFF/SHORT/LONG) Indicators POWER Cause: The electrical wiring has special specifications, and so the no operation is possible without below remedy. May vary due to local conditions) Latency 2.3 ms Dynamic Range 110 dB or greater Frequency Response 20 Hz--20 kHz Nominal Output Level -10 dBu Output Impedance 1 k ohm Recommended Load Impedance 10 k ohms or greater Indicators POWER
Great Deal 
New Comment